LIFTING BEAMS - LIFTING EYE - LIFTING LOOP Design, installation, proof load testing and LOLER 1998 regulations certification.

Lifting points for Elevator Installation

Burke Lifts limited specialize in the design, installation and proof load testing of all types of lifting points that are used in the Elevator Installation, Modernization and Service industry. This ranges from small 250kg lifting eyes and up to 5000kg Safe Working Load lifting beams that are required to install Goods/Car Lifts. We also specialize in lifting beams that are required within lift shafts for new style machine room less lifts that require a scaffoldless lift shaft installation methods. These scaffoldless installation methods are now used by most of the world's leading elevator companies.

Lifting point examination and load testing for Elevator Servicing

Burke Lifts Limited also specialise in the thorough examination and proof load testing of previously installed lifting points that are used for lift servicing and maintenance purposes. During the course of an lifts working life, they will need servicing and repair work completing on them. During these works, lifting points that are in the lift motor room or within the lift shaft will need to be used. As these pieces of equipment are used for lifting loads, they come under the Health & Safety Executives LOLER 1998 regulations. The Lifting Operations and Lifting Equipment Regulations (L.O.L.E.R 1998) regulations state that all lifting points are required by law to undergo regular thorough inspections and load testing to ensure the safety of the individuals that are using the them. This means that all lifting apparatus should be subject to thorough examination, and where appropriate, inspected by a competent independent 3rd party.

What do Burke Lifts install, proof load test and LOLER certificate?

- Lifting Beams ranging from 250kg to 5000kg Safe Working Load
- Lifting loops either mechanically fixed to steel work or fixed to a shaft wall
or lift shaft roof. Ranging from 250kg to 2000kg Safe Working Load.
- Lifting eyes ranging from 100kg to 2500kg Safe a Working load
- BSEN795 fall arrest anchor points. Specifically for installing modern day scaffoldless lift installation methods.
- Fall restraint systems.
- Anchor pull testing.

Proof Load Testing of Lifting Beams & Lifting Eye/Loops testing for Elevator Servicing and Repairs

Burke Lifts Limited also specializes in the thorough examination and proof load testing of previously installed lifting points that are used for lift servicing and maintenance purposes. During the course of a lifts working life, they will need servicing and repair work completing on them. During these works, the lifting points that are either in the lift motor room or within the lift shaft will need to be used to complete certain works. As these pieces of equipment are used for lifting loads, they come under the Health & Safety Executives LOLER 1998 regulations. The Lifting Operations and Lifting Equipment Regulations (L.O.L.E.R 1998) regulations state that all lifting points are required by law to undergo regular thorough inspections and load testing to ensure the safety of the individuals that are using the them. This means that all lifting apparatus should be subject to thorough examination, and where appropriate, inspected by a competent independent 3rd party.

How can Burke Lifts Help me comply with current LOLER 1998 regulations?

Burke Lifts Limited can complete on-site thorough examinations & proof load testing of all types of fixed lifting points

- Lifting Beams ranging from 250kg to 5000kg Safe Working Load.
- Lifting loops either mechanically fixed to steel work or fixed to a shaft wall or lift shaft roof. Ranging from 250kg to 2000kg Safe Working Load.
- Lifting eyes ranging from 100kg to 2500kg Safe Working Load.
-BSEN795 fall arrest anchor points. Specifically for installing modern day scaffoldless lift installation methods.
-Fall restraint systems.
- Anchor pulls testing.